Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Heated/Cooled Seat Schematics Connector End View Reference: Heated/Cooled Seat Connector End Views DEFINITION: The heated seat cushion or seat back temperature can not be controlled or adjusted. The heated seat system can be turned ON and OFF. | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |
2 | Verify that the Rear Heated Seat Temperature Adjustment Inoperative complaint is present. Does the rear heated seat system operate as described in the description and operation? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 | Test the heated seat element control circuit between the rear heated seat module and the seat cushion heating element for a short to ground. Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition? | Go to Step 7 | Go to Step 4 |
4 | Test the heated seat element control circuit between the rear heated seat module and the seat back heating element for a short to ground. Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition? | Go to Step 7 | Go to Step 5 |
5 | Inspect for poor connections at the harness connector of the rear heated seat module. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition? | Go to Step 7 | Go to Step 6 |
6 | Replace the rear heated seat module. Refer to Control Module References for replacement, setup, and programming. Did you complete the replacement? | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
