GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2007 🢒 STS 🢒 Suspension 🢒 Suspension General Diagnosis 🢒 Stabilizer Shaft Insulator Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tires and wheels. Refer to Tire and Wheel Removal and Installation .

    3. Object Number: 874638 Size: SH
  3. Remove stabilizer shaft link to stabilizer shaft retaining nut.
  4. Separate the stabilizer shaft link from the stabilizer shaft.
  5. Remove the stabilizer shaft bracket mounting bolts.
  6. Remove the stabilizer shaft bracket.
  7. Remove the stabilizer shaft insulator. Note the position of the Insulator for installation.

Installation Procedure
  1. Install the stabilizer shaft insulator to the stabilizer shaft with the slit facing rearward.
  2. Install the stabilizer shaft bracket.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the stabilizer shaft bracket mounting bolts.

    4. Tighten
    Tighten the bolts to 110 N·m (81 lb ft).


    Object Number: 874638 Size: SH
  4. Install the stabilizer shaft link to the stabilizer shaft.
  5. Install stabilizer shaft link to stabilizer shaft retaining nut.

    6. Tighten
    Tighten the nut to 110 N·m (81 lb ft).

  6. Install the tires and wheels. Refer to Tire and Wheel Removal and Installation .
  7. Lower the vehicle.