Schematic Reference: Exterior Lights Schematics

Connector End View Reference: Master Electrical Component List

1

Did you perform the Diagnostic System Check - Vehicle?

Go to Step 2

Go to Diagnostic System Check - Vehicle

Do the park lamps operate properly?

Go to Step 3

Go to Park Lamps Inoperative

1. Turn OFF the ignition.
2. Remove the inoperative cornering/side marker lamp bulb.
3. Connect a test lamp between the inoperative cornering/side marker lamp supply voltage circuit and the ground circuit of the inoperative cornering/side marker lamp.
4. Turn ON the ignition, with the engine OFF.
5. Turn ON the park lamps.

Does the test lamp illuminate?

Go to Step 5

Go to Step 4

Test the inoperative cornering/side marker lamp supply voltage circuit for an open or high resistance. Refer to Circuit Testing and Wiring Repairs .

Did you find and correct the condition?

Go to Step 8

Go to Step 6

Inspect for poor connections at the inoperative cornering/side marker lamp bulb. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs .

Did you find and correct the condition?

Go to Step 8

Go to Step 7

Locate and repair an open or high resistance in the ground circuit of the inoperative cornering/side marker lamp. Refer to Circuit Testing and Wiring Repairs .

Did you complete the repair?

Go to Step 8

--

Replace the inoperative cornering/side marker lamp bulb.

Did you complete the replacement?

Go to Step 8

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2