GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2007 🢒 STS 🢒 Steering 🢒 Steering Wheel and Column 🢒 Bucket Seat Replacement

Removal Procedure

    Caution: Refer to SIR Caution in the Preface section.

  1. Disable the SIR System. Refer to SIR Disabling and Enabling .

    2. Object Number: 756764 Size: SH
  2. Move the front seat forward in order to access the front seat track trim cover (1).
  3. Remove the seat track trim cover (1) from the seat track.

    4. Object Number: 1486360 Size: SH
  4. Remove the seat track fasteners (1) from the seat track.

    5. Object Number: 756765 Size: SH

    Important: Move seat to rear position and raise front of seat to gain access to seat electrical connectors.

  5. Disconnect the seat electrical connectors (1).

    6. Object Number: 1773091 Size: SH
  6. Use an awl or equivalent to release the seat belt from the seat. The hole to insert the awl is located on the outboard side of the seat (1).
  7. Remove seat belt from seat.
  8. Disconnect wire harness from seat bracket.
  9. With the aid of an assistant, remove the seat from the vehicle.

Installation Procedure
  1. With the aid of an assistant, install the seat into the vehicle.

    2. Object Number: 756763 Size: SH
  2. Insert the front tabs (1) on the seat track into the floor.

    3. Object Number: 756765 Size: SH
  3. Connect the electrical connectors (1).
  4. Connect wire harness to seat bracket.

    5. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1486360 Size: SH
  5. Install the seat track fasteners (1).

    6. Tighten
    Tighten the seat track fasteners to 30 N·m (22 lb ft).


    Object Number: 756764 Size: SH
  6. Install the seat track trim covers (1).
  7. Install seat belt to seat.
  8. Enable the SIR System. Refer to SIR Disabling and Enabling .