Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
---|---|---|---|
Instrument Panel Module (IPM) Operating Conditions: Ignition ON, Engine OFF | |||
Steering Wheel Controls Return | Inputs | Counts | Varies |
Battery Voltage Signal | Load Management | Volts | 12.5 |
Accessory Relay Status | Outputs | On/Off | On |
Run Relay Status | Outputs | On/Off | On |
Run/Crank Relay Status | Outputs | On/Off | On |
Start LED Duty Cycle | Outputs | % | Varies |
Accessory LED Duty Cycle | Outputs | % | Varies |
OFF LED Duty Cycle | Outputs | % | Varies |
Rear Integration Module (RIM) Operating Conditions: Ignition ON, Engine OFF | |||
Battery Voltage Signal | Data | Volts | 12.5 |
Run/Crank Terminal Status | Inputs | Active/Inactive | Active |
Sunroof Enable Command | Outputs | Enable/Disabled | Enable |
Remote Control Door Lock Receiver (RCDLR) Operating Conditions: Ignition ON, Engine OFF | |||
Battery Voltage Signal | Data | Volts | 12.5 |
Ignition Mode Switch | Data | Volts | 12.5 |
Ignition Mode Switch | Data | Idle, ACC/OFF, Run | Idle |
Ignition Switch Fault | Data | No/Yes | No |
Invalid Power Moding | Data | No/Yes | No |
Back up Power Moding | Data | Inactive/Active | Inactive |
Run/Crank Relay Command | Data | On/Off | Off |
Run/Crank Relay Status | Data | On/Off | On |
Driver/Passenger Door Module (DDM/PDM) Operating Conditions: Ignition ON, Engine OFF | |||
Door Ajar Switch | Data | Door Closed/Door Ajar | Door Closed |