The audio and video adapters enable connection of audio and video devices, such as a hand-held computer, video camera or a video cassette recorder, to the navigation system. The audio and video input from the playback source is viewed on the navigation system screen and the audio is heard through the speakers. The video image is only available when the vehicle is in P (Park).
Drivers are encouraged to set up any auxiliary device while the vehicle is in P (Park). See "Defensive Driving" in the Index of the vehicles owner manual for more information on driver distraction.
Connect the auxiliary device to the audio and video connectors, located in the center console. The system requires standard RCA cables, not included, to connect the auxiliary device to the RCA jacks. Refer to the manufacturer instructions for proper usage. The video, and left, and right audio jacks have graphics and color coding to allow for easy identification.
Connect the auxiliary devices to the jacks as follows:
| • | Connect the video input of the auxiliary device to the yellow video input/output jack. |
| • | Connect the left audio input of the auxiliary device to the white audio input jack. For auxiliary devices that only have one audio connection, use the white jack. |
| • | Connect the right audio input of the auxiliary device to the red audio input jack. |
Auxiliary Video Image Screen
To play other audio sources using the auxiliary device:
- Connect the auxiliary device as explained previously.
- Play the auxiliary device according to the auxiliary devices instructions.
- Press the AUX hard key.
- Select the Video In/Out screen button.
- Press the BAND or the SRCE hard key to exit or stop playing the connected auxiliary device. See Navigation Audio Systemfor more information.
