Removal Procedure
- Remove the air inlet grille panel. Refer to
Air Inlet Grille Panel Replacement
.
- With two hands release the tabs on each side of the access cover.
- Lift up the filter access cover (1).
- Remove the filter (1) from the filter housing.
- Gently pry out on the filter housing to separate the
housing from the sheet metal.
- Remove the passenger air filter housing (1).
Installation Procedure
- Install the passenger air filter housing (1).
- Press the passenger air filter housing until all clips engage into the
sheet metal.
- Ensure that there is a good seal between the passenger
air filter housing and the sheet metal.
- Install the filter (1) in to the filter housing.
- Install the filter access cover (1).
- Install the air inlet grille panel. Refer to
Air Inlet Grille Panel Replacement .