Special Tools

1. Install the EN 46106 through the starter mounting hole.



2. Remove the crankshaft balancer bolt.



3. Install the J 38416-2 in the nose of the crankshaft.



4. Install the J 24420-C in order to remove the crankshaft balancer.



5. Pull the crankshaft balancer off by tightening the center bolt on the J 24420-C until the crankshaft balancer pulls off of the crankshaft end.
6. Remove the J 24420-C from the crankshaft balancer.



7. Remove the EN 46106 from the starter mounting hole.