GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 STS 🢒 Engine 🢒 Engine Mechanical - 4.6L (LH2) 🢒 Engine Coolant Fan Bracket Replacement

Engine Coolant Fan Bracket Replacement LH2

Removal Procedure

    Object Number: 1442452 Size: SH
  1. Remove the engine cooling fan. Refer to Fan Replacement .

    2. Object Number: 1442445 Size: SH
  2. Remove the fan bracket to crankshaft balancer bolts.
  3. Remove the fan bracket to engine block bolts.
  4. Remove the fan bracket from the vehicle.

Installation Procedure

    Object Number: 1442445 Size: SH
  1. Install the fan bracket to the engine.
  2. Install but DO NOT tighten the fan bracket to engine block bolts.
  3. If necessary, with the aid of an assistant, tap the engine ignition until the fan bracket to crankshaft balancer bolt holes are accessible.

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the fan bracket to crankshaft balancer bolts.

    5. Tighten

        • Tighten the fan bracket to crankshaft balancer bolts to 24 N·m (18 lb ft).
        • Tighten the fan bracket to engine block bolts to 24 N·m (18 lb ft).

    Object Number: 1442452 Size: SH
  5. Install the engine cooling fan. Refer to Fan Replacement .