Low and Reverse Clutch Overhaul 6L80
| Table 1: | Low and Reverse Clutch Plate Removal |
| Table 2: | Low and Reverse Clutch Piston Removal |
| Table 3: | Low and Reverse Clutch Piston Installation |
| Table 4: | Low and Reverse Clutch Plate Installation |
Low and Reverse Clutch Plate Removal
Callout | Component Name |
|---|---|
1 | Low and Reverse Clutch Backing Plate Retaining Ring |
2 | Low and Reverse Clutch Backing Plate |
3 | Low and Reverse Clutch Plate Assembly (Qty: 5) |
4 | Low and Reverse Clutch Plate (Qty: 5) |
5 | Low and Reverse Clutch (Waved) Plate |
Low and Reverse Clutch Piston Removal
Callout | Component Name |
|---|---|
1 | Low and Reverse Clutch Spring Retaining Ring Notice: Ensure the DT 47779 contacts the sprag assembly and not the sprag retaining ring. Damage to the sprag may result. Special ToolDT 47779 Clutch Spring Compressor |
2 | Low Clutch Sprag Assembly |
3 | Low and Reverse Clutch Spring |
4 | Low and Reverse Clutch Piston Assembly Tip |
5 | Low Clutch Sprag Seal Notice: Refer to Seal Reuse Notice in the Preface section. |
Low and Reverse Clutch Piston Installation
Callout | Component Name | ||||||
|---|---|---|---|---|---|---|---|
1 | Low and Reverse Clutch Piston Assembly Tip | ||||||
2 | Low Clutch Sprag Seal Notice: Refer to Seal Reuse Notice in the Preface section. Tip Special ToolDT 47780 Low Clutch Sprag Seal Cone | ||||||
3 | Low and Reverse Clutch Spring Notice: Ensure the spring tabs are facing up during installation. Failure to do so may cause damage to the clutch assembly. | ||||||
4 | Low Clutch Sprag Assembly Tip
| ||||||
5 | Low and Reverse Clutch Spring Retaining Ring Notice: Ensure the DT 47779 contacts the sprag assembly and not the sprag retaining ring. Damage to the sprag may result. Notice: The retaining ring gap must be aligned with the 3 missing splines on the center support hub. Failure to do so may cause damage to the clutch assembly. Special Tools
|
Low and Reverse Clutch Plate Installation
Callout | Component Name |
|---|---|
1 | Low and Reverse Clutch (Waved) Plate |
2 | Low and Reverse Clutch Plate (Qty: 5) |
3 | Low and Reverse Clutch Plate Assembly (Qty: 5) |
4 | Low and Reverse Clutch Backing Plate |
5 | Low and Reverse Clutch Backing Plate Retaining Ring Tip |
Low and Reverse Clutch Overhaul 6L50
| Table 1: | Low and Reverse Clutch Plate Removal |
| Table 2: | Low and Reverse Clutch Piston Removal |
| Table 3: | Low and Reverse Clutch Piston Installation |
| Table 4: | Low and Reverse Clutch Plate Installation |
Low and Reverse Clutch Plate Removal
Callout | Component Name |
|---|---|
1 | Low and Reverse Clutch Backing Plate Retaining Ring |
2 | Low and Reverse Clutch Backing Plate |
3 | Low and Reverse Clutch Plate Assembly (Qty: 6) |
4 | Low and Reverse Clutch Plate (Qty: 6) |
5 | Low and Reverse Clutch (Waved) Plate |
Low and Reverse Clutch Piston Removal
Callout | Component Name | ||||
|---|---|---|---|---|---|
1 | Low and Reverse Clutch Spring Retaining Ring Notice: DT-49122 must be used with the DT-48069 in order to prevent damage to the low clutch sprag retainer. Special Tool
| ||||
2 | Low Clutch Sprag Assembly | ||||
3 | Low and Reverse Clutch Spring | ||||
4 | Low and Reverse Clutch Piston Assembly Tip | ||||
5 | Low Clutch Sprag Seal Notice: Refer to Seal Reuse Notice in the Preface section. |
Low and Reverse Clutch Piston Installation
Callout | Component Name | ||||||||
|---|---|---|---|---|---|---|---|---|---|
1 | Low and Reverse Clutch Piston Assembly Tip | ||||||||
2 | Low Clutch Sprag Seal Notice: Refer to Seal Reuse Notice in the Preface section. Tip Special ToolDT-48070 Low Clutch Sprag Seal Cone | ||||||||
3 | Low and Reverse Clutch Spring Notice: Ensure the spring tabs are facing up during installation. Failure to do so may cause damage to the clutch assembly. | ||||||||
4 | Low Clutch Sprag Assembly Tip
| ||||||||
5 | Low and Reverse Clutch Spring Retaining Ring Notice: DT-49122 must be used with the DT-48069 in order to prevent damage to the low clutch sprag retainer. Notice: The retaining ring gap must be aligned with the 3 missing splines on the center support hub. Failure to do so may cause damage to the clutch assembly. Special Tools
|
Low and Reverse Clutch Plate Installation
Callout | Component Name |
|---|---|
1 | Low and Reverse Clutch (Waved) Plate |
2 | Low and Reverse Clutch Plate (Qty: 6) |
3 | Low and Reverse Clutch Plate Assembly (Qty: 6) |
4 | Low and Reverse Clutch Backing Plate Tip |
5 | Low and Reverse Clutch Backing Plate Retaining Ring Tip |
