Torque Converter Housing with Fluid Pump Installation. Cadillac STS 2008

For 1990-2009 cars only

Makes 🢒 Cadillac 🢒 2008 🢒 STS 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Torque Converter Housing with Fluid Pump Installation

Callout

Component Name

NEW Fluid Pump Seal

Torque Converter (with Fluid Pump) Housing Assembly

Notice: Ensure the turbine shaft (O-ring) seal is not installed prior to installing the torque converter housing assembly. The seal may become cut or damaged during installation of the torque converter housing assembly.

Bolt

Tip

•	6L50 Bolt M8 x 1.25 x 50 (Qty: 8)

•	6L80 Bolt M10 x 1.5 x 50 (Qty: 9)

Notice: Refer to Fastener Notice in the Preface section.

Tighten

•	Tighten 6L50 bolts to 31 N·m (23 lb ft) in the sequence shown.

•	Tighten 6L80 bolts to 72 N·m (53 lb ft) in the sequence shown.

NEW Turbine Shaft (O-Ring) Seal