GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 STS 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Theft Deterrent Vehicle Inclination Sensor Replacement

Removal Procedure

    Object Number: 899939 Size: SH
  1. Remove the right rear compartment trim. Refer to Rear Compartment Trim Panel Replacement.
  2. Remove the theft deterrent inclination sensor (2) from the theft deterrent alarm (1).
  3. Disconnect the electrical connector from the sensor.
  4. Remove the sensor from the vehicle.

Installation Procedure

    Object Number: 899939 Size: SH
  1. Reconnect the electrical connector to the sensor.
  2. Install the inclination sensor (2) onto the theft deterrent alarm  (1).
  3. Install the rear compartment trim. Refer to Rear Compartment Trim Panel Replacement.