Radio Rear Speaker Replacement for Cadillac STS 2008

Radio Rear Speaker Replacement Center

1. Remove the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement .



2. Remove the nuts securing the center speaker (2).
3. Disconnect the electrical connector.
4. Remove the speaker (2).

1. Install the speaker (2).
2. Connect the electrical connector.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the nuts securing the center speaker (2).

Tighten
Tighten the nuts to 9 N·m (80 lb in).

4. Install the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement .

Radio Rear Speaker Replacement Left

1. Remove the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement .



2. Remove the nuts securing the left speaker (3).
3. Disconnect the electrical connector.
4. Remove the speaker (3).

1. Install the speaker (3).
2. Connect the electrical connector.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the nuts securing the left speaker (3).

Tighten
Tighten the nuts to 9 N·m (80 lb in).

4. Install the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement .

Radio Rear Speaker Replacement Right

1. Remove the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement .



2. Remove the screws securing the right speaker (1).
3. Disconnect the electrical connector.
4. Remove the speaker (1).

1. Install the speaker (1).
2. Connect the electrical connector.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the screws securing the right speaker (1).

Tighten
Tighten the screws to 9 N·m (80 lb in).

4. Install the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement .