Preliminary Procedure

Remove the outer belt sealing strip. Refer to Front Side Door Window Outer Sealing Strip Replacement .

1

Front Side Door Applique

Notice: Refer to Exterior Trim Emblem Removal Notice in the Preface section.

Tip

1. The part and surface should be 21°C (70°F) prior to installation. The vehicle should remain 21°C (70°F) for one hour after assembly to allow adhesive to develop sufficient bond strength.
2. Use a J 25070 Heat Gun or equivalent to remove the old applique. Clean all the adhesive residue from the door and wipe the surface dry with a clean lint-free towel prior to installing the new applique.
3. When removing the 3 protective liners from adhesive backed applique, be careful not to touch the tape with hands and do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion.
4. Press the applique firmly to the front side door to ensure full adhesion is made to the door.