GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 STS 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Rear Compartment Lid Nameplate Replacement

Rear Compartment Lid Nameplate Replacement Cadillac Nameplate


Object Number: 1740614 Size: MF

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Plate Assembly, Rear Compartment Lid Name "Cadillac"

Tip

  1. For additional information on emblem/nameplate replacement refer to Emblem/Nameplate Replacement .
  2. Dimension (d) is 20 mm (0.79 in) from the left vertical edge of the "STS" emblem.
  3. Dimension (c) is 31 mm (1.22 in) from the lower horizontal edge of the rear compartment lid.

Rear Compartment Lid Nameplate Replacement Northstar Nameplate


Object Number: 1740611 Size: MF

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Plate Assembly, Rear Compartment Lid Name "Northstar"

Tip

  1. For additional information on emblem/nameplate replacement refer to Emblem/Nameplate Replacement .
  2. Dimension (a) is 67 mm (2.64 in) from the left vertical edge of the rear compartment lid.
  3. Dimension (b) is 31 mm (1.22 in) from the lower horizontal edge of the rear compartment lid.

Rear Compartment Lid Nameplate Replacement STS Nameplate


Object Number: 1740620 Size: MF

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Plate Assembly, Rear Compartment Lid Name "STS"

Tip

  1. For additional information on emblem/nameplate replacement refer to Emblem/Nameplate Replacement .
  2. Dimension (e) is 31 mm (1.22 in) from the lower horizontal edge of the rear compartment lid.
  3. Dimension (f) is 10 mm (0.39 in) from the left vertical edge of the "4" emblem.

Rear Compartment Lid Nameplate Replacement 4 Nameplate


Object Number: 1740616 Size: MF

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Plate Assembly, Rear Compartment Lid Name "4"

Tip

  1. For additional information on emblem/nameplate replacement refer to Emblem/Nameplate Replacement .
  2. Dimension (h) is 28 mm (1.10 in) from the lower horizontal edge of the rear compartment lid.
  3. Dimension (i) is 28.5 mm (1.12 in) from the right vertical edge of the rear compartment lid.