GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 STS 🢒 Steering 🢒 Power Steering 🢒 Power Steering Gear Inlet Pipe/Hose Replacement

Power Steering Gear Inlet Pipe/Hose Replacement LH2

Removal Procedure
  1. Remove the front air deflector. Refer to Front Air Deflector Replacement .
  2. Place a drain pan under the vehicle.
  3. Remove the air cleaner intake duct. Refer to Air Cleaner Outlet Duct Replacement .
  4. Loosen the air cleaner assembly front half retaining screws.
  5. Remove the air cleaner assembly front half.

    6. Object Number: 1301852 Size: SH
  6. Disconnect the power steering gear inlet hose fitting from the power steering pump.
  7. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    8. Object Number: 1301597 Size: SH
  8. Remove the power steering gear inlet hose to the frame mounting bolts.

    9. Object Number: 1301495 Size: SH
  9. Remove the power steering gear inlet hose to power steering gear retaining bolt.

    10. Object Number: 908682 Size: SH
  10. Remove the power steering gear inlet hose from the power steering gear.
  11. Remove the power steering hose from the vehicle.

Installation Procedure

    Object Number: 908682 Size: SH
  1. Install the power steering hose to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1301495 Size: SH
  2. Install the power steering gear inlet hose to power steering gear retaining bolt.

    3. Tighten
    Tighten the bolt to 23 N·m (17 lb in).

  3. Install the power steering gear inlet hose to frame mounting bolts.

    4. Tighten
    Tighten the bolts to 10 N·m (88 lb in).


    Object Number: 1301597 Size: SH
  4. Install the front air deflector. Refer to Front Air Deflector Replacement .
  5. Lower the vehicle.

    6. Object Number: 1301852 Size: SH
  6. Connect the power steering gear inlet hose fitting to the power steering pump.

    7. Tighten
    Tighten the fitting to 38 N·m (28 lb in)

  7. Install the power steering inlet hose quick connect to fitting.
  8. Install the air cleaner assembly front half.

    9. Tighten
    Tighten the screws to 8 N·m (71 lb in).

  9. Install the air cleaner intake duct. Refer to Air Cleaner Outlet Duct Replacement .
  10. Remove the drain pan from under the vehicle.
  11. Bleed the power steering system. Refer to Power Steering System Bleeding .

Power Steering Gear Inlet Pipe/Hose Replacement LY7

Removal Procedure

    Object Number: 1304375 Size: SH
  1. Remove the front air deflector. Refer to Front Air Deflector Replacement .
  2. Place a drain pan under the vehicle.
  3. Remove the air cleaner intake duct. Refer to Air Cleaner Inlet Duct Replacement .
  4. Loosen the air cleaner assembly front half retaining screws.
  5. Remove the air cleaner assembly front half.
  6. Remove the power steering gear inlet hose fitting from the power steering pump.
  7. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    8. Object Number: 1304393 Size: SH
  8. Remove the power steering gear inlet hose to the frame mounting bolts.

    9. Object Number: 1301495 Size: SH
  9. Remove the power steering gear inlet hose to power steering gear retaining bolt.

    10. Object Number: 908682 Size: SH
  10. Remove the power steering gear inlet hose from the power steering gear.
  11. Remove the power steering hose from the vehicle.

Installation Procedure

    Object Number: 908682 Size: SH
  1. Install the power steering hose to the vehicle.
  2. Install the power steering gear inlet hose to the power steering gear.

    3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1301495 Size: SH
  3. Install the power steering gear inlet hose to power steering gear retaining bolt.

    4. Tighten
    Tighten the bolt to 23 N·m (17 lb in).


    Object Number: 1304375 Size: SH
  4. Install the power steering gear inlet hose to frame mounting bolts.

    5. Tighten
    Tighten the bolts to 10 N·m (88 lb in).

  5. Install the front air deflector. Refer to Front Air Deflector Replacement .
  6. Lower the vehicle.
  7. Install the power steering gear inlet hose fitting to the power steering pump.

    8. Tighten
    Tighten the fitting to 38 N·m (28 lb in).

  8. Install the power steering gear inlet hose quick connect to the fitting.
  9. Install the air cleaner assembly front half.

    10. Tighten
    Tighten the screws to 8 N·m (71 lb in).

  10. Install the air cleaner intake duct. Refer to Air Cleaner Inlet Duct Replacement .
  11. Remove the drain pan from under the vehicle.
  12. Bleed the power steering system. Refer to Power Steering System Bleeding .