Power Steering Control Module Programming and Setup. Cadillac STS 2008

For 1990-2009 cars only

Makes 🢒 Cadillac 🢒 2008 🢒 STS 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Power Steering Control Module Programming and Setup

The following service procedures require either a programming or a setup event performed for a complete repair.

If the power steering control module (PSCM) is replaced, the following procedures must be performed in the following order:

•	PSCM Reprogramming--Refer to Service Programming System (SPS) .

•	Revise the new actuator setup procedure using the Scan Tool setup function.

•	Revise the actuator removal procedure using the Scan Tool setup function.

•	Revise the steering angle position sensor procedure using the Scan Tool setup function.