Preliminary Procedure

Remove the parking brake lever pedal assembly. Refer to Parking Brake Lever Pedal Assembly Replacement.

1

Power Steering Control Module Nut

Notice: Refer to Fastener Notice in the Preface section.

Tighten
9 N·m (80 lb in)

2

Power Steering Control Module Bolt

Tighten
10 N·m (89 lb in)

3

Power Steering Control Module

Procedure

1. Disconnect any electrical connectors as needed.
2. After repairs, set the front toe. Refer to Front Toe Adjustment.
3. Use the scan tool special functions menu to perform the Set Up PSCM Calibration procedure.
4. Ensure all vehicle doors are closed and wait for 30 seconds in order to let the vehicle modules re-enter sleep mode.
5. Perform the diagnostic system check. Refer to Diagnostic System Check - Vehicle.