Part Restriction - Stabilitrak 3.0 Components - keywords ABS EBCM EBTCM JL7 part PQC restriction stalitrak stability

The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.

As part of our ongoing quality improvement efforts regarding new technology, some of the Stabilitrak3 components will be placed on restriction through the PQC to assist Engineering with early product feedback. Your cooperation with this program is greatly appreciated.

Effective Monday, October 15, 2007, the following part numbers will be restricted:

P/N 15298281

P/N 15828083

P/N 25863979 supersedes to 25954805

P/N 15870377

P/N 15948486

P/N 25789969

P/N 25864344

P/N 25874822

Please complete the following questionnaire before contacting PQC at 1-866-654-7654.

Stabilitrak 3.0 Questionnaire

1. Customer Complaint (as it reads on the RO):
2. List all DTCs:
3. SI Document ID# used:
4. Document each step of the trouble chart:
5. Has the ALDL been checked for proper engagement with Tech2?
6. Is the electronic wiring harness routed properly?
7. What PIs or Service Bulletins were performed?
8. Have all affected ground zones been checked?
9. Have the EBCM connectors been checked for looseness or damage?
10. Controller scan code (bar code on EBCM):

Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.