Read this manual thoroughly to become familiar with how the navigation system operates.

The navigation system includes navigation and audio functions.

While entering the vehicle or when turning the vehicle off, some DVD Map Disc noise is normal.

Keeping your eyes on the road and your mind on the drive is important for safe driving. The navigation system has built-in features intended to help keep your eyes on the road and mind on the drive. Some features may be disabled while driving. Note that these functions will be grayed-out. A grayed-out function indicates it is not available when the vehicle is moving.

All functions are available when the vehicle is parked. Do the following before driving:

Caution: Taking your eyes off the road too long or too often while using the navigation system could cause a crash resulting in injury or death to you or others. Focus your attention on driving.

Caution: Avoid looking too long or too often at the moving map on the navigation screen. This could cause a crash and you or others can be injured or killed. Use the turn-by-turn voice guidance directions whenever possible.

Use the navigation system to:

You should always be alert and obey traffic and roadway laws and instructions, regardless of the guidance from the navigation system. Because the navigation system uses street map information that does not include all traffic restrictions or the latest road changes, it may suggest using a road that is now closed for construction or a turn that is prohibited by signs at the intersection. Because the system uses limited information, you must always evaluate whether following the system's directions is safe and legal for the current conditions.

When the navigation system is turned on, a screen may appear with the information below, and you must read and acknowledge the information it contains.

Caution: Taking your eyes off the road for extended periods could cause a crash resulting in injury or death to you or others.

To help avoid a crash in which you or others could be killed:

After you acknowledge the start up information you will be able to access the NAV (navigation) and DEST (destination) functions. Once accessed, you can enter or delete information in the navigation system or access other functions. See instructions later in this section.

Every fifty times the vehicle is started and the navigation system is turned on, the Warning screen appears. After reading the warning, select OK to load the map DVD information. If OK is not selected, all hard keys except for NAV (Navigation) and DEST (Destination) can be accessed. You can also press the NAV hard key to have this Warning screen appear.

When getting started, set the navigation system to your preference or delete information you may have entered using various options.

This navigation system can record and store destinations. At times, such as the disposal of your vehicle, you may want to delete these destinations. Refer to the following sections to delete the destination information that has been stored.

See "Memory Points" under Navigation Menu for deleting stored destinations.

To set preset radio stations:

1. Press the power/volume knob to turn the system on.
2. Press the BAND hard key.
3. Select the desired band (AM, FM1, FM2, XM1, or XM2 (if equipped)).
4. Seek, scan, or tune to the desired stations using the seek and scan hard key arrows or the tuning knob.
5. Press and hold one of the six preset screen buttons, at the bottom of the screen, until a beep is heard or see the station displayed on the selected preset button.
6. Repeat the steps for each preset.

See "Preset Stations" under Navigation Audio System for more information.

To set the time:

1. Press the power/volume knob to turn the system on.
2. Press the CONFIG hard key.
3. Press the (clock) screen button.
4. Select the 12hour or 24hour screen button to display the time in standard or military time.
5. Select the AM or PM screen buttons.
6. Select the appropriate time zone screen button.
7. Select the Daylight Saving Time screen button, if necessary.
8. Press and hold the hour and minute arrow buttons to increase or to decrease the time or press the GPS TIME screen button to reset radio time to GPS time.

The radio uses the GPS satellite to set the time. The vehicle needs to be in an open area to receive the signal. See "Clock" under Configure Menu for more information.

Before entering an Address, Point of Interest, Home, or Preset Destination, select the appropriate region that contains the final destination. The vehicle must be stopped to perform this operation.

Setting the Region

To set the region:

1. Press the power/volume knob to turn the system on.
2. Insert the DVD map disc. See "Installing the Map DVD" under Maps for more information.

A notice may appear. Touch the I agree screen button to proceed.

3. Press the ROUTE hard key.
4. Press the Region screen button.
5. Select the appropriate region numbered screen button that contains the final destination.

The system returns to the DESTINATION ENTRY screen. See "Region" under Destination for more information.

Entering an Address

To set a destination by entering a street address:

1. Press the power/volume knob to turn the system on.
2. Insert the DVD map disc. See "Installing the Map DVD" under Maps for more information.

A notice may appear. Touch the I agree screen button to proceed.

3. Press the ROUTE hard key. Verify that the selected Region is correct.
4. Press the Address screen button.
5. Enter the street name using the alpha keypad on the screen.

Do not enter directional information or street type, and use the space symbol screen button () between street or city names. For example, the street name N. Royal Oak Rd. should be entered as royaloak. Use the backspace () screen button if an incorrect character has been entered.

6. Select the desired street name with the correct designation (Dr., Ln., St., etc.) from the list.
7. If there is more than one city, the system displays the list of cities that have a street with that name. Select a city from the list.
8. Enter the house number using the numeric keypad on the screen and touch the OK screen button.

A map screen appears with the destination marked.

9. Select the (destination) symbol screen button.
10. Select the Guide screen button.
11. Once driving begins, an audio prompt to "Proceed to the highlighted route" is heard. The vehicle is now in route guidance mode.

See "Address" under Destinationfor more information.

Entering a Point of Interest (POI)

To set a destination by entering a Point of Interest (POI):

1. Press the power/volume knob to turn the system on.
2. Insert the DVD map disc. See "Installing the Map DVD" under Maps for more information.

A notice may appear. Touch the I agree screen button to proceed.

3. Press the ROUTE hard key. Verify that the selected Region is correct.
4. Press the (POI) screen button.
5. Enter the specific title of the POI in the name space (i.e. Washington Monument) using the alpha keypad on the screen.
6. Select the POI from the list.
7. If there is more than one city, the system displays the list of cities that have a street with that name. Select a city from the list or select the Input Name screen button to input the city name.

A map screen appears with the destination marked.

8. Select the (destination) symbol screen button.
9. Select the Guide screen button.
10. Once you begin driving, an audio prompt to "Proceed to the highlighted route" is heard. You are now in route guidance mode.

Using the Category or City selections will aid the system in finding your POI by limiting the search options. See "Point of Interest (POI)" under Destination for more information.

Storing a Home Destination

1. Press the power/volume knob to turn the system on.
2. Insert the DVD map disc. See "Installing the Map DVD" under Maps for more information.

A notice may appear. Touch the I agree screen button to proceed.

3. Press the (map) hard key.
4. Press the Menu screen button from the map screen.
5. Press the Memory Points screen button.
6. Press the Home screen button.
7. Press the Add screen button.
8. Press the Address screen button and enter all address information.
9. Press the OK screen button.

The Home icon will be highlighted on the DESTINATION ENTRY screen. See "Using Your Home or Preset Destinations" later in this section for more information.

See "Memory Points" under Navigation Menu for more information.

Storing a Preset Destination

1. Press the power/volume knob to turn the system on.
2. Insert the DVD map disc. See "Installing the Map DVD" under Maps for more information.

A notice may appear. Touch the I agree screen button to proceed.

3. Press the (map) hard key.
4. Press the Menu screen button from the map screen.
5. Press the Memory Points screen button.
6. Press the Preset Dests. screen button.
7. Press the Add screen button and select the numbered preset row to store the destination as.
8. Press the Address screen button and enter all address information.
9. Press the OK screen button.

The numbered preset destination will be highlighted on the DESTINATION ENTRY screen. See "Using Your Home or Preset Destinations" later in this section for more information.

See "Memory Points" under Navigation Menu for more information.

These destinations are available for selection while driving.

1. Press the power/volume knob to turn the system on.
2. Insert the DVD map disc. See "Installing the Map DVD" under Maps for more information.

A notice may appear. Touch the I agree screen button to proceed.

3. Press the ROUTE hard key. Verify that the selected Region is correct.
4. Select the (Home symbol) or one of the available preset destination symbols. A map screen appears with the destination marked.
5. Select the (destination) symbol screen button.
6. Select the Guide screen button.
7. Once driving begins, an audio prompt to "Proceed to the highlighted route" is heard. The vehicle is now in route guidance mode.

See "Preset Destination" or "Home" under Destination for more information.

Guidance is canceled once at the final destination. To cancel guidance prior to arrival at the final destination:

1. Press the (map) hard key.
2. Press the Menu screen button from the map screen.
3. Press the Change Route screen button.
4. Press the Cancel Guidance screen button.
5. Press the Yes screen button to confirm cancellation.

To adjust the volume of voice guidance prompts:

1. Press the CONFIG hard key.
2. Press the (navigation set up) screen button.
3. Press the Volume screen button.
4. Select the desired volume or select Off. The system plays back the new volume level.

See "Volume" under Configure Menufor more information.