Fuel Pipe Shield Replacement LLT

1. Remove the cross vehicle brace. Refer to Cross Vehicle Brace Replacement.
2. Remove the fuel injection sight shield. Refer to Fuel Injector Sight Shield Replacement.
3. Remove the intake manifold insulator.
4. Remove the wiper transmission. Refer to Windshield Wiper Transmission Replacement.



5. Remove the fuel pipe shield to intake manifold bolts (1).
6. Remove the fuel pipe shield to cylinder bolt (1).
7. Carefully remove the fuel pipe shield from the vehicle. Take care not to damage the insulation behind the shield.

1. Position the fuel pipe shield behind the high pressure fuel pump. Take care not to damage the insulation behind the shield.
2. Install the fuel pipe shield to cylinder bolt (1). Hand tighten at this time.

Caution: Refer to Fastener Caution in the Preface section.

3. Install the fuel pipe shield to intake manifold bolts (1).

Tighten

1. Tighten the fuel pipe shield to manifold bolts to 23 N·m (17 lb ft).
2. Tighten the fuel pipe shield to head bolt to 10 N·m (89 lb in).
4. Install the wiper transmission. Refer to Windshield Wiper Transmission Replacement.
5. Install the fuel injection sight shield. Refer to Fuel Injector Sight Shield Replacement.
6. Install the cross vehicle brace. Refer to Cross Vehicle Brace Replacement.