GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 STS 🢒 Engine 🢒 Engine Cooling 🢒 Drive Belt Tensioner Replacement - Generator

Object Number: 1616170 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Remove the engine sight shield. Refer to Intake Manifold Sight Shield Replacement.
  2. Remove the front section of the supercharger inlet duct. Refer to Supercharger Inlet Duct Assembly Replacement.
  3. Remove the supercharger drive belt. Refer to Supercharger Belt Replacement.
  4. Remove the air conditioning, power steering, and water pump drive belt. Refer to Water Pump and Air Conditioning Compressor and Power Steering Pump Belt Replacement.
  5. Remove the charge air cooler coolant pump. Refer to Charge Air Cooler Coolant Pump Replacement.
  6. Remove the generator drive belt. Refer to Generator Drive Belt Replacement.

1

Drive Belt Tensioner Assembly Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
50 N·m (37 lb ft)

2

Drive Belt Tensioner Assembly

Tip

    • Rotate the tensioner in a clockwise direction during belt removal and installation.
    • Remove and install the bolt and tensioner as an assembly.
    • Ensure that the alignment pin on the rear of the tensioner assembly is aligned with the locating hole on the engine during the installation and torque procedure.