GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 STS 🢒 Engine 🢒 Engine Cooling 🢒 Engine Coolant Fan Shroud Replacement

Engine Coolant Fan Shroud Replacement LH2 With V92

Removal Procedure
  1. Remove the fan. Refer to Fan Replacement.
  2. Lower the vehicle.

    3. Object Number: 1372876 Size: SH
  3. Disconnect the condenser tube from the fan shroud retainer clip.
  4. Remove the cooling fan shroud retaining bolts.
  5. Remove the cooling fan shroud.

Installation Procedure

    Object Number: 1372876 Size: SH
  1. Install the cooling fan shroud.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the cooling fan shroud retaining bolts and tighten to 5.4 N·m (48 lb in).
  3. Connect the condenser tube to the fan shroud retainer clip.
  4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  5. Install the fan. Refer to Fan Replacement.

Engine Coolant Fan Shroud Replacement LH2 Without V92, LLT


Object Number: 2098765 Size: MF

Callout

Component Name

Preliminary Procedures

    Warning: An electric fan under the hood can start up even when the engine is not running and can injure you. Keep hands, clothing and tools away from any underhood electric fan.

  1. Remove the air cleaner. Refer to Air Cleaner Assembly Replacement
  2. Remove the front compartment sight shield. Refer to Front Compartment Sight Shields Replacement
  3. Disconnect the cooling fan electrical connectors
  4. Remove the auxiliary water pump and any hoses.
  5. Remove any hoses or pipes.
  6. Disconnect the condenser tube from the cooling fan shroud retainer clip.
  7. Disengage the surge tank inlet hose from the retaining features on the cooling fan shroud and reposition aside.

1

Engine Cooling Fan Shroud Fasteners (Qty 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
5.4 N·m (48 lb in)

2

Engine Cooling Fan Shroud

Engine Coolant Fan Shroud Replacement LC3, LY7

Removal Procedure

    Warning: An electric fan under the hood can start up even when the engine is not running and can injure you. Keep hands, clothing and tools away from any underhood electric fan.

    Warning: To help avoid personal injury or damage to the vehicle, a bent, cracked, or damaged fan blade or housing should always be replaced.

  1. Remove the air cleaner. Refer to Air Cleaner Assembly Replacement.
  2. Remove the front compartment sight shield. Refer to Front Compartment Sight Shields Replacement.

    3. Object Number: 1363014 Size: SH
  3. Disconnect the cooling fan electrical connectors.
  4. Remove the auxiliary water pump and any hoses.
  5. Remove any hoses or pipes.
  6. Disconnect the condenser tube from the cooling fan shroud retainer clip.
  7. Disengage the surge tank inlet hose from the retaining features on the cooling fan shroud and reposition aside.
  8. Remove the retaining bolts that secure the cooling fan shroud to the radiator.
  9. Remove the cooling fan assembly.

Installation Procedure

    Object Number: 1363014 Size: SH
  1. Install the cooling fan assembly.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the retaining bolts that secure the cooling fan shroud to the radiator and tighten to 5.4 N·m (48 lb in).
  3. Engage the surge tank inlet hose to the retaining features on the cooling fan shroud.
  4. Connect the condenser tube to the cooling fan shroud retainer clip.
  5. Install the auxiliary water pump and any hoses.
  6. Connect any hoses or pipes.
  7. Connect the cooling fan electrical connectors.
  8. Install the front compartment sight shield. Refer to Front Compartment Sight Shields Replacement.
  9. Install the air cleaner. Refer to Air Cleaner Assembly Replacement.