Preliminary Procedures

1. Install the engine support fixture to support the engine. Refer to Engine Support Fixture.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
3. Remove the right engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side.
4. Remove the left side front axle shaft. Refer to Front Wheel Drive Shaft Replacement.

1

Engine Mount Fastener (Qty: 2)

Caution: Refer to Component Fastener Tightening Caution in the Preface section.

Tighten
80 N·m (59 lb ft)

2

Engine Mount

Procedure

1. Disconnect the electrical connector.
2. Transfer components as necessary.