GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 STS 🢒 Engine 🢒 Engine Mechanical - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 1 (Right Side) Intake

Removal Procedure

    Object Number: 1285235 Size: SH
  1. Turn the ignition OFF.
  2. Remove the front compartment sight shields as necessary. Refer to Front Compartment Sight Shields Replacement.
  3. Disconnect the camshaft position (CMP) actuator valve electrical connector.

    4. Object Number: 1285237 Size: SH
  4. Remove the CMP actuator valve bolt.
  5. Remove the CMP actuator valve.
  6. Inspect the CMP actuator valve seal for damage. Replace the seal if necessary.

Installation Procedure
  1. Inspect the CMP actuator valve seal for damage. Replace the seal if necessary.

    2. Object Number: 1285237 Size: SH
  2. Install the CMP actuator valve.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the CMP actuator valve bolt and tighten to 10 N·m (89 lb in).

    4. Object Number: 1285235 Size: SH
  4. Connect the CMP actuator valve electrical connector.
  5. Install the front compartment sight shields as necessary. Refer to Front Compartment Sight Shields Replacement.