GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 STS 🢒 Engine 🢒 Engine Mechanical - 4.4L 🢒 Starter Installation
  1. If installing a NEW starter motor, transfer the cables from the old starter motor.
  2. Install the positive battery cable to the starter motor stud.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the starter motor stud nut and tighten to 10 N·m (89 lb in).
  4. Install the solenoid wiring harness to the starter solenoid stud.
  5. Install the starter solenoid stud nut and tighten to 4 N·m (35 lb in).

    6. Object Number: 1656788 Size: SH
  6. Position the starter motor in position.
  7. Install the starter motor bolts and tighten to 30 N·m (22 lb ft).

    8. Object Number: 1761739 Size: SH
  8. Install a NEW O-ring on the crankshaft position sensor.

    9. Object Number: 1656794 Size: SH
  9. Install the crankshaft position sensor.
  10. Install the crankshaft position sensor bolt and tighten to 10 N·m (89 lb in).

    11. Object Number: 1656791 Size: SH
  11. Install the knock sensors.
  12. Install the knock sensor bolts and tighten to 25 N·m (18 lb ft).

    13. Object Number: 1656789 Size: SH
  13. Install the knock and crankshaft position sensor wiring harness.
  14. Connect the knock and crankshaft position sensor wiring harness retainers to the center, and side of the block valley.
  15. Install the knock and crankshaft position sensor wiring harness bolt and tighten to 10 N·m (89 lb in).
  16. Connect the knock and crankshaft position sensor wiring harness to the knock sensors and crankshaft position sensor.

    17. Object Number: 1714261 Size: SH
  17. Install the engine coolant temperature (ECT) sensor to the right cylinder head and tighten to 20 N·m (15 lb ft).