Removal Procedure
- Remove the fuel injector sight shield. Refer to
Fuel Injector Sight Shield Replacement.
- Disconnect the positive crankcase ventilation (PCV) tube from the air cleaner duct.
- Loosen the air duct clamp at the throttle body.
- Loosen the air duct clamp at the mass air flow (MAF)/intake air temperature (IAT) sensor.
- Remove the air cleaner duct from the vehicle.
Installation Procedure
- Install the air cleaner duct to the vehicle.
Caution: Refer to Fastener Caution in the Preface section.
- Tighten the air cleaner duct clamps at the throttle body and the MAF/IAT sensor to
3 N·m (27 lb in).
- Connect the PCV tube to the air cleaner duct.
- Install the fuel injector sight shield. Refer to
Fuel Injector Sight Shield Replacement.