GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 STS 🢒 Engine 🢒 Engine Mechanical - 4.6L (LH2) 🢒 Engine Mount Bracket Replacement - Left Side

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the left exhaust manifold. Refer to Exhaust Manifold Removal - Left Side.
  3. Install a screw jack with a block of wood under the oil pan for support.

    4. Object Number: 888298 Size: SH
  4. Remove the upper engine mount retaining nut.

    5. Object Number: 888296 Size: SH

    Note: Ensure not to distort or bend the engine mount heat shield.

  5. Remove the left engine mount bracket retaining bolts.
  6. Remove the left engine mount bracket.

Installation Procedure

    Object Number: 888296 Size: SH
  1. Install the left engine mount brackets.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the left engine mount bracket retaining bolts and tighten to 60 N·m (44 lb ft).

    3. Object Number: 888298 Size: SH
  3. Install the upper engine mount retaining nut and tighten to 80 N·m (59 lb ft).
  4. Remove the screw jack.
  5. Install the left exhaust manifold. Refer to Exhaust Manifold Removal - Left Side.
  6. Lower the vehicle.