Auxiliary Water Pump Replacement 4.6L (LH2) with RPOs V03/V92

Special Tools

J 38185 Hose Clamp Pliers

1. Drain the coolant. Refer to Cooling System Draining and Filling.



2. Using the J 38185 slide the hose clamp down on the hose (3).
3. Disconnect the hose from the auxiliary water pump.
4. Using the J 38185 slide the hose clamp back on the hose (1).
5. Disconnect the hose from the auxiliary water pump.
6. Disconnect the auxiliary water pump electrical connector.



7. Remove the auxiliary water pump nuts.
8. Remove the auxiliary water pump.

1. Install the auxiliary water pump.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the auxiliary water pump nuts and tighten to 9 N·m (80 lb in).



3. Connect the auxiliary water pump electrical connector.
4. Connect the hose (3) to the auxiliary water pump.
5. Using the J 38185 slide the hose clamp back into the original position on the hose.
6. Connect the hose (1) to the auxiliary water pump.
7. Using the J 38185 slide the hose clamp back to the original position on the hose.
8. Fill the coolant. Refer to Cooling System Draining and Filling.

Auxiliary Water Pump Replacement LLT