GM Service Manual Online
For 1990-2009 cars only
Makes
›
Cadillac
›
2009
›
STS
›
Diagnostic Navigation
›
Vehicle Diagnostic Information
› Mode Valve Actuator Replacement
Search
Mode Valve Actuator Replacement for Cadillac STS 2009
Removal Procedure
Remove the instrument panel (I/P) carrier. Refer to
Instrument Panel Carrier Replacement
.
Disconnect the mode actuator electrical connector.
Remove the mode actuator screws (3).
Remove the mode actuator.
Installation Procedure
Install the mode actuator.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the mode actuator screws (2) and tighten to
1 N·m (9 lb in )
.
Connect the electrical connector to the actuator.
Install the I/P carrier. Refer to
Instrument Panel Carrier Replacement
.