GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 STS 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Front Floor Console Replacement

Removal Procedure
  1. Remove the upper console trim. Refer to Front Floor Upper Console Trim Plate Replacement.
  2. Remove the shiftier bezel. Refer to Console Shift Lever Bezel Replacement.

    3. Object Number: 1442967 Size: SH
  3. Move the driver and passenger front seat in order to access the retaining bolts.
  4. Reposition the carpet in order to access the retaining bolts.
  5. Remove the retaining bolts.

    6. Object Number: 1442969 Size: SH
  6. Disconnect the console electrical connectors.
  7. Lift the console upward in order to release the retainers securing the rear of the console to the vehicle.
  8. Remove the console from the vehicle.

Installation Procedure

    Object Number: 1442969 Size: SH
  1. Connect the console electrical connectors.
  2. Position the center console to the mounting brackets.

    3. Object Number: 1442967 Size: SH
  3. Move the driver and passenger front seat in order to install the retaining bolts.

    4. Caution: Refer to Fastener Caution in the Preface section.

  4. Install the retaining bolts and tighten to 9 N·m (80 lb in).
  5. Ensure the carpet is positioned properly in the vehicle.
  6. Install the upper console trim. Refer to Front Floor Upper Console Trim Plate Replacement.
  7. Install the shiftier bezel. Refer to Console Shift Lever Bezel Replacement.