Removal Procedure
Warning: Refer to SIR Warning in the Preface section.
- Push in and pull up on the front of the rear seat cushion.
- Lift up and out on the seat cushion.
- Remove the rear seat cushion from the vehicle.
Installation Procedure
- Install the rear seat cushion into the vehicle.
- Engage the center wire hook, on the back of the seat cushion, under the seat back frame.
- Position the rear seat buckles in the slots of the rear seat cushion.
- Push down and rearward to seat the rear seat cushion into the latches in the number 4 bar.
Note: Pull up on the front of the rear seat cushion to ensure that the cushion is secure.