GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the air inlet assembly. Refer to Air Inlet Assembly Replacement.

  2. Object Number: 819755  Size: SH
  3. Disconnect the electrical connector from the recirculation actuator.

  4. Object Number: 819756  Size: SH
  5. Remove the recirculation actuator screws (1).
  6. Remove the recirculation actuator.

Installation Procedure


    Object Number: 819756  Size: SH
  1. Install the recirculation actuator.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the recirculation actuator screws (1) and tighten to 1 N·m (9 lb in).

  4. Object Number: 819755  Size: SH
  5. Connect the electrical connector to the recirculation actuator.
  6. Install the air inlet assembly. Refer to Air Inlet Assembly Replacement.