GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 STS 🢒 Safety and Security 🢒 Remote Functions 🢒 Ignition Lock Key Transmitter Antenna Replacement - Floor Console

Ignition Lock Key Transmitter Antenna Replacement - Floor Console Cup Holder


Object Number: 1836060 Size: MF

Callout

Component Name

Preliminary Procedure

Remove HVAC ducts from the front floor console. Refer to Front Floor Console Cup Holder Replacement.

1

Ignition Lock Key Transmitter Antenna Assembly

Tip

    • Pull tabs out to remove the ignition lock key transmitter antenna from the front floor console cup holder assembly.
    • Disconnect the electrical connector.

Ignition Lock Key Transmitter Antenna Replacement - Floor Console Rear


Object Number: 1836059 Size: MF

Callout

Component Name

Preliminary Procedure

  1. Remove HVAC ducts from the front floor console. Refer to Front Floor Console Cup Holder Replacement
  2. Remove the center console end panel. Refer to Center Console End Panel Replacement

1

Front Floor Console Wiring Harness Assembly

2

Ignition Lock Key Transmitter Antenna Nut (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m(18 lb in)

3

Ignition Lock Key Transmitter Antenna Assembly