GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 STS 🢒 Safety and Security 🢒 Seat Belts 🢒 Rear Seat Belt Retractor Replacement

Removal Procedure

    Warning: Refer to SIR Warning in the Preface section.

  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement.
  2. Remove the rear seat back. Refer to Rear Seat Back Replacement.

    3. Object Number: 729863 Size: SH
  3. Remove the rear seat shoulder belt to the floor pan fastener.
  4. Remove the rear trim shelf panel. Refer to Rear Window Shelf Trim Panel Replacement.
  5. Remove the sail panel. Refer to Sail Panel Replacement.

    6. Object Number: 755545 Size: SH
  6. Remove the seat belt retractor fastener (2).
  7. Remove the seat belt retractor (1).

Installation Procedure

    Object Number: 755545 Size: SH
  1. Install the rear shoulder belt retractor (1). Engage the tab on the retractor (1).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the seat belt retractor fastener (2) and tighten to 30 N·m (22 lb ft).

    3. Object Number: 729863 Size: SH
  3. Route the shoulder belt through the sail panel and verify that it is not twisted.
  4. Install the shoulder belt fastener and tighten to 30 N·m (22 lb ft).
  5. Install the sail panel. Refer to Sail Panel Replacement.
  6. Install the rear trim shelf panel. Refer to Rear Window Shelf Trim Panel Replacement.
  7. Install the rear seat back. Refer to Rear Seat Back Replacement.
  8. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement.