Windshield Washer Solvent Container Replacement. Cadillac STS 2009

For 1990-2009 cars only

Makes 🢒 Cadillac 🢒 2009 🢒 STS 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Windshield Washer Solvent Container Replacement

Windshield Washer Solvent Container Replacement With CE4

Callout

Component Name

Remove the front bumper fascia extension in order to access and remove the windshield washer container. Refer to Front Bumper Fascia Extension Replacement.
Drain the windshield washer solvent into a suitable clean container.
Disconnect the forward lamp harness electrical connectors from the washer container.

Windshield Washer Solvent Hose

Headlamp Washer Solvent Pump Hose

Washer Container Screws (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
6 N·m (53 lb in)

Washer Container Nut

Tighten
6 N·m (53 lb in)

Windshield Washer Solvent Container

Tip

•	Lift the container from the stud on the tie bar reinforcement outer panel and lower the washer container from the vehicle.

•	Transfer parts as needed.

Callout	Component Name
Preliminary Procedure Remove the front fascia extension in order to access the washer container connections. Refer to Front Bumper Fascia Extension Replacement. Drain the windshield washer solvent into a suitable clean container. Disconnect the forward harness electrical connectors from the washer container.
1	Windshield Washer Solvent Hose
2	Washer Container Screws (Qty: 3) Caution: Refer to Fastener Caution in the Preface section. Tighten 6 N·m (53 lb in)
3	Washer Container Nut Tighten 6 N·m (53 lb in)
4	Windshield Washer Solvent Container Tip Lift the container from the stud on the tie bar reinforcement outer panel and lower the washer container from the vehicle.