CONSOLE TRIM REPAIR KIT P/N AND INSTALL PROCEDURE

MODELS AFFECTED: 1978-84 SEVILLE ELEGANTE 1982-84 ELDORADO TOURING COUPE

The trim material seams located on the console between the rear compartment and armrest on Seville Elegante and Eldorado Touring Coupes may separate resulting in an unacceptable appearance.

A console trim repair kit, P/N 1631160, has been released to repair this condition. The repair kit contains a molded plastic trim plate and two plastic rivets. The new trim plate is made to cover the area where the trim material may have separated. The trim plate and rivets are used on all 1984 production consoles after VIN 620044 on Eldorados and 810449 on Sevilles.

INSTALLATION INSTRUCTIONS:

1. Identify interior trim color as listed on second line of body I.D. plate. Paint the trim plate and rivet heads in semi-gloss finish to match console.

YEAR TRIM COLOR TRIM NO. R-M DITZLER DUPONT ---- ----------- -------- --- -------- ------ SEVILLE ELEGANTE ---------------- 1978 LT. Gray 163 9553 33291 45225 1978 Saddle 603 9561 24495 45229 1979-1982 LT. Slate Gray 133 9969 33352 45860 1979 DK. Cedar 703 9975 51045 45865 1980-1981 LT. Beige 613 11642 34820 C8006 1981 MED.Mauve 993 12273 51077 C8121 1981 DK. Blue 263 11641 15344 C8005 1982 DK. Redwood 773 12749D 25000 D8214 1982 DK. Sable 673 12745 24996 D8218 1983 LT. Sand Gray 603 13182 33567 C8384 1983 MED.Beech 583 13184 25194 C8332 1983-1984 DK. Briar Brown 673 13175D 25306 C8383 1984 DK. Royal Blue 223 13191D 15632 C8385 1984 DK. Maple 773 12271F 72415 C8115 1984 Black 193 4401 9387 4428

ELDORADO TOURING COUPE

1982 LT. Slate Gray 134 9969 33352 45860 1983-1984 MED.Beech 584 13184 25194 C8332

2. Place trim plate over the repair area and position until a snug fit is achieved with the top and side surfaces of the housing (see Figure 1).

3. Before securing the trim plate, make sure it does not interfere with the console armrest or rear compartment door operation.

4. Using the properly positioned trim plate as a template, drill two 7/32"(5.56mm) holes into the console (see Figure 1).

5. While firmly holding trim plate in place, insert rivets into holes and press on center locking pins until pins are flush with rivet heads.

For warranty purposes, use Operation No. T6097 at .2 hour to install trim plate. Add to color coat .2 hour (AA).

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.