TURN SIGNAL MAY BE UNPLEASANT INSTALL TURN SIGNAL CLICKER

SUBJECT: TURN SIGNAL CHIME MAYBE LOUD, SOFT, OR UNPLEASANT (INSTALL TURN SIGNAL CLICKER)

VEHICLES AFFECTED: 1988-91 'E', 'K' MODELS

Some owners of 1988, 1989, 1990 and early 1991 Eldorados and Sevilles may comment that the turn signal chime is too loud, too soft, or unpleasant. During 1991 Production the current turn signal chime will be replaced with a traditional turn signal clicker. The turn signal clicker may be installed in the past model Eldorados and Sevilles listed above if the owner prefers this to the turn signal chime.

To install the turn signal clicker you will need:

o One turn signal clicker, P/N #3524120

o One Relay connector body, P/N #12034003

o One Relay connector body secondary lock, P/N #12033872

o Terminal repair kit, essential tool J-38125.

To install clicking turn signal use the following procedure:

1. Locate and disconnect turn signal chime behind left side of instrument panel above the park brake mechanism.

2. Remove turn signal chime connector using the proper terminal remove tool from the terminal repair kit J-38125. Discard turn signal chime and connector.

3. Insert terminals in relay connector body. Light blue wire (circuit 14) in cavity 5. Dark blue wire (circuit 15) in cavity 2. Black/white wire (circuit 803) in cavity 4. Cut the terminal off the orange wire (circuit 140) and tape wire back to harness. Avoid shorting circuit 140 to ground.

4. Install secondary lock.

5. Connect and install turn signal clicker. The turn signal clicker may be installed using its integral clip in the same mounting position as the old turn signal chime.

6. Verify turn signal clicker operation.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.