CTR. PILLAR TRIM ASSY. WARPING (INSTALL TRIM W/FORWARD EDGE)

SUBJECT: CENTER PILLAR TRIM ASSEMBLY WARPING (INSTALL NEW CENTER PILLAR TRIM WITH REINFORCED FOPWARD EDGE)

MODELS AFFECTED: 1992 SEVILLES

Some 1992 Sevilles may experience warping of the B-Pillar trim at the forward edge near the seat belt retractor. Refer to Figure 1. This condition is due to a combination of heat and compression on this part at an area that is not reinforced.

To repair this condition new parts are available with a reinforced forward edge. Order parts based on the following information:

Interior Trim Passenger Side Driver Side Color Part Number Part Number ----- ------------- -----------

White 3541743 3541744 Light Gray 3541745 3541746 Black 3541747 3541748 Very Dark Sapphire 3541757 3541758 Light Neutral 3541759 3541760 Taupe 3541761 3541762 Red Gamet 3541763 3541764 Medium Beechwood 3541773 3541774

Refer to Section 10-3-6 of the 1992 E/K Service Information Manual for removal and installation of B-Pillar trim.

Parts are currently available from GMSPO.

For warranty purposes use Labor Operation T6680 at .2 hour for passenger side and Labor Operation T6681 at .2 hour for driver side.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.