For 1990-2009 cars only
- Before removing the crankshaft, measure the crankshaft end play. Use the following procedure:
- Locate or fabricate two v-blocks to support the crankshaft.
- Using two hands, lift the crankshaft straight up from the engine block.
- Place the crankshaft on the v-blocks in a secure place.
| 1.1. | Reinstall the lower crankcase. |
| 1.2. | Place a dial indicator at the crankshaft nose. |
| 1.3. | Gently force the crankshaft to the extreme front and rear positions with a pry tool while monitoring the movement of the dial indicator. |
| 1.4. | The crankshaft end play should not exceed 0.05-0.5 mm (0.002-0.020 in). |
| 1.5. | If the specifications are exceeded, replace the thrust bearing. |
| 1.6. | If a new thrust bearing does not bring the tolerances within specification, replace the crankshaft. |
| 1.7. | Remove the lower crankcase. |
