GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 1998 🢒 Seville 🢒 Engine 🢒 Engine Controls - 4.0L and 4.6L 🢒 Cruise Control Module Replacement

Removal Procedure

    Object Number: 141850 Size: SH
  1. Remove the cruise control cable (3) at the engine bracket and the throttle body cam.

    2. Object Number: 141845 Size: SH
  2. Remove the cruise control cable (1) from the module assembly connector (3).
  3. Disconnect the electrical connector from the module assembly.

    4. Object Number: 141846 Size: SH
  4. Remove the nuts (2) from the mounting studs.

    5. Object Number: 141841 Size: SH
  5. Remove the fasteners (3) retaining the cruise control module mounting bracket (2) to the cruise control module (1).

    6. Remove the cruise control module bracket (2) from the module (1).

Installation Procedure

    Object Number: 141841 Size: SH
  1. Install the cruise control module (1) to the bracket (2).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the module to bracket fasteners (3).

    3. Tighten
    Tighten the fasteners to 7.5 N·m (66 lb in).


    Object Number: 141846 Size: SH
  3. Install cruise control module (1) onto the studs on the cowl.
  4. Install the two nuts (2).

    5. Tighten
    Tighten the bracket retaining nuts to 9 N·m (80 lb in).

  5. Connect the electrical connector to the module.

    6. Object Number: 141845 Size: SH
  6. Install the cruise control cable (1) to the module assembly connector (3).

    7. Object Number: 141850 Size: SH
  7. Install the cruise control cable (3) to the engine bracket and the throttle body cam.
  8. Adjust the cruise control cable. Refer to Cruise Control Cable Adjustment