GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 1998 🢒 Seville 🢒 Suspension 🢒 Road Sensing Suspension (RSS) 🢒 Electronic Suspension Control Module Replacement

Removal Procedure

    Object Number: 258354 Size: SH
  1. Remove the trunk front trim panel.
  2. Access the rear electronics compartment.
  3. Disconnect the electrical connectors from the CVRSS module.
  4. Remove the CVRSS module from the right electronics bay.

Installation Procedure

    Object Number: 258354 Size: SH
  1. Install the CVRSS module in the right electronics bay.
  2. Connect the electrical connectors to the CVRSS module.
  3. Close the rear electronics compartment.
  4. Install the trunk front trim panel.
  5. Perform the CVRSS module Calibration. Refer to Electronic Suspension Control Module Calibration .