Foot Rest Replacement LHD

1. Using a small flat-bladed tool, release the tabs in the top corners and sides of the foot rest cover.
2. Remove the foot rest cover from the base.



3. Remove the two bolts from the foot rest base.
4. Remove the foot rest base.

1. Install the foot rest base.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the two bolts.

Tighten
Tighten the foot rest base bolt to 2 N·m (18 lb in).




3. Install the foot rest cover.
4. Place the tabs on the bottom of the foot rest cover into the slots in the base.
5. Rotate the top of the foot rest cover into place.
6. Snap the top tabs into the foot rest base.