Removal Procedure
- The AIR BAG Warning Indicator is not serviceable separately. The
Instrument Panel (IP) Cluster must be service as a complete unit.
- Turn the ignition switch to OFF position.
- Disconnect the IP cluster connector.
- Remove the Instrument Panel (IP) Cluster. Refer to
Instrument Cluster Replacement
in Instrument
Panel, Guages and Console.
Installation Procedure
- Install the Instrument Panel (IP) Cluster. Refer to
Instrument Cluster Replacement
in Instrument Panel, Guages
and Console.
- Connect the IP cluster connector.
- Turn the ignition switch to the RUN position. The AIR BAG Warning
Indicator should flash seven times then turn off.
- If the AIR BAG Warning Indicator stays illuminated after flashing
seven times perform the SIR diagnostic system check. Refer to
SIR Diagnostic System Check
.