Removal Procedure
- Remove the overhead console.
Refer to
Roof Console Replacement
in Interior Trim.
- Remove the three screws from the lamp retainer.
Important: Care should be taken when rotating the lamp retainer not to snag or
rip the flat wire harness.
- Rotate the lamp retainer from right to left.
- Replace the inoperative bulb.
Installation Procedure
Important: Care should be taken when rotating the lamp retainer not to snag or
rip the flat wire harness.
- Rotate the lamp retainer back into place.
Notice: Refer to Fastener Notice in the Preface section.
- Install the three fasteners fully driven, seated, but not stripped.
- Install the overhead console. Refer to
Roof Console Replacement
in Interior Trim.