Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the entire Exterior Lights System Check performed? | -- | ||
2 | Backprobe the hazard switch assembly connector with a DMM from cavity G (ORN) to cavity C (WHT). Is the voltage within the specified range? | 10-15 V | ||
3 |
Does the scan tool indicate that the Theft Lighting output was ON? | -- | ||
4 | Disconnect the DIM connector C1. Do the hazard lamps turn off? | -- | ||
5 | Replace the dash integration module (DIM). Refer to Body Control Module Replacement in Body Control System. Is the DIM replacement complete? | -- | -- | |
6 | Replace the hazard switch assembly. Refer to Hazard Flasher Switch Replacement in Instrument Panel, Gauges and Console. Is the hazard switch assembly replacement complete? | -- | -- | |
7 | Repair the short to ground in CKT 111 (WHT). Refer to Wiring Repairs in Wiring Systems. Is the circuit repair complete? | -- | -- |
