Was the entire Exterior Lights System Check performed?

--

Go to Step 2

Go to Exterior Lights System Check

1. Disconnect the underhood lamp connector.
2. Place the headlamp lamp switch in the PARK position.
3. Connect a DMM from the underhood lamp connector cavity A (YEL) to ground.

Is the voltage within the specified range?

10-15 V

Go to Step 3

Go to Step 5

Connect a DMM from the underhood lamp connector cavity A (YEL) to cavity B (BLK).

Is the voltage within the specified range?

10-15 V

Go to Step 4

Go to Step 6

Replace the underhood lamp. Refer to Underhood Lamp Replacement .

Is the underhood lamp replacement complete?

--

Go to Exterior Lights System Check

--

Repair the open in CKT 32 (YEL) between the rear junction block and the underhood lamp. Refer to Wiring Repairs in Wiring Systems.

Is the circuit repair complete?

--

Go to Exterior Lights System Check

--

Repair the open in CKT 150 (BLK) between the underhood lamp and G101. Refer to Wiring Repairs in Wiring Systems.

Is the circuit repair complete?

--

Go to Exterior Lights System Check

--