Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: This table checks for all functions of the RKE transmitters being inoperative. | ||||
1 | Was the Remote Keyless Entry Diagnostic System Check performed? | -- | Go to Step 2 | |
2 | Resynchronize the transmitters. Refer to Transmitter Synchronization . Does the remote keyless entry system now operate? | -- | Go to Step 3 | |
3 |
Is the voltage within the specified range? | 10-15 V | Go to Step 4 | Go to Step 5 |
4 | Measure the voltage from the RKE module connector terminal 1 to 4. Is the voltage within the specified range? | 10-15 V | Go to Step 7 | Go to Step 6 |
5 | Repair the open or short to ground in CKT 540 (ORN). Is the repair complete? | -- | -- | |
6 | Repair the open in CKT 1351 (BLK/WHT). Is the repair complete? | -- | -- | |
7 | Replace the RKE module. Refer to Remote Control Door Lock Receiver Replacement . Is the repair complete? | -- | -- | |
