GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 1998 🢒 Seville 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Television Antenna Module Replacement

Removal Procedure
  1. Remove rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement in Interior Trim.
  2. Remove the electrical connectors from the TV antenna module.

    3. Object Number: 296903 Size: SH
  3. Remove the fastener retaining the TV antenna module.
  4. Remove the TV antenna module.

Installation Procedure

    Object Number: 296903 Size: SH
  1. Install the TV antenna module, ensuring the locating tab is positioned properly.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the retaining fastener.

    3. Tighten
    Tighten the TV antenna module fastener to 10 N·m (89 lb in).

  3. Connect the electrical connectors to the TV antenna module.
  4. Install the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement in Interior Trim.