Step | Action | Value(s) | Yes | No | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
DEFINITION: The SECURITY indicator is on or (flashing) at all times or is inoperative. | ||||||||||||||||||
1 | Were you sent here from the Theft Deterrent System Diagnostic System Check? | -- | Go to Step 2 | |||||||||||||||
2 | Using a scan tool, try to establish communications with the IPC, LFDM, and VTD systems. Can the scan tool communicate with the IPC, LFDM, and VTD systems? | -- | Go to Step 3 | Go to Step 9 | ||||||||||||||
3 | Using the power door lock switches, operate the driver and passenger door locks. Do the power door locks operate correctly? | -- | Go to Step 4 | |||||||||||||||
4 |
Is the door ajar message displayed? | -- | Go to Diagnostic System Check - Instrument Cluster in Instrument Panel, Guages and Console. | Go to Step 5 | ||||||||||||||
5 | Open the driver door. Is the door ajar message displayed? | -- | Go to Step 6 | Go to Diagnostic System Check - Instrument Cluster in Instrument Panel, Guages and Console. | ||||||||||||||
6 |
Is the door ajar message displayed? | -- | Go to Step 7 | Go to Diagnostic System Check - Instrument Cluster in Instrument Panel, Guages and Console. | ||||||||||||||
7 | Turn ON the ignition.. Is the SECURITY indicator on or flashing? | -- | Go to Step 8 | |||||||||||||||
8 | Inspect the following circuits for an intermittent malfunction:
Did you find and correct the condition? | -- | Go to Step 10 | |||||||||||||||
9 | Repair the no communication malfunction to the system that could not communicate with the scan tool. Refer to the appropriate Diagnostic System Check that applies to the system that did not communicate. Is the repair complete? | -- | Go to Step 10 | -- | ||||||||||||||
10 |
Is the repair complete? | -- | -- | |||||||||||||||
